Notes for hot stamping

Notes for stamping foil 
1. It is necessary to choose the appropriate hot stamping foil according to the different varieties of the ironed objects.
Hot stamping must master the temperature, pressure, hot stamping speed of the three parties, and according to the hot stamping material, hot stamping area and different.

2. Master the speed and direction of turning tool when cutting.

3. Anodized foil should be suitable for the properties of paper, ink (especially black ink), kerosene, composite glue, hot stamping must be kept dry, so as to avoid oxidation or damage to the bronzing layer.

4. The general packaging is :64CM×120M roll, 10 rolls per box;
Customizable width of 64CM, length of 120M or 360m large rolls or other special specifications (1.5m wide 1000m or 3000m long).

5. Store in a cool and ventilated place, with pressure proof, moisture proof, heat proof and sun protection.

Folding storage condition
(1) temperature 5 ℃ ~ 20 ℃

(2) 30-70% humidity

(3) vertical placement

(4) avoid direct sunlight