In the selection of corrugated boxes, we must first take into account the nature of the product, weight, storage and transportation conditions and circulation environment, followed by the design of shock-proof packaging principles and
Corrugated Box design methods, in addition to follow the relevant standards, such as export commodity packaging to meet international standards or foreign requirements, and to go through the relevant tests, Therefore, the selection of corrugated box packaging should generally pay attention to the following two points.
The corrugated models of corrugated board are divided into four categories: A,B,C,E according to the corrugated height, and the mechanical properties of different corrugated boards are also different. The plane pressure of type A corrugated board is the highest, and the compressive strength is larger, while type B is the opposite, and the plane pressure, vertical pressure, parallel pressure and buffer of type C are better. The thickness between the corrugated cardboard, type A is the largest, type C followed, type B again, and type E is the smallest, because the thickness of the small cardboard processing bending is easier, therefore, B-shaped corrugated paper is widely used for packaging boxes with low pressure strength requirements. According to the different mechanical properties of corrugated cardboard, single-sided corrugated boxes with A or C type is good, double-sided corrugated boxes with A,B or B,C type combination is appropriate, close to the outer surface with B type, can play an impact resistance. A,B type or B, C type combined, can improve the physical and mechanical properties of the carton; From the printability comparison, both type B and type C are conducive to printing.
(2) The shape of the corrugated box Under the premise of ensuring the quality of the carton, the processing materials and packaging costs of the carton should be saved as much as possible. For example, the carton with the same volume is the most material saving when the length: width: height is 2:1:2, and the most material cost when the ratio is 1:1:1. Therefore, the use of square boxes should be avoided as far as possible. It is also necessary to take into account the utilization rate of the product to the box volume, the utilization rate of the box to the volume of the truck and the train car, and the stability of the stacking when warehousing and pumping.
What is the direct relationship between the break resistance and the pressure resistance of the carton
Pressure resistance generally refers to static force, in addition to static pressure also includes dynamic impact force. The former can be determined by the maximum accumulation experiment, and the latter is generally selected by the degree of natural fall at a certain height and accidental impact in the process of handling and transportation turbulence.
What is the conceptual difference between carton puncture strength and burst resistance
The penetration strength refers to the maximum power that the carton can withstand against sudden impact; The breaking strength refers to the internal resistance to local extrusion. The standard of domestic light industry has canceled the puncture strength index, but the export carton still has requirements.
Want to learn more about shipping box and carton printing, please follow Liyang.
